What are the benefits of 64-bit Financial Management. Which components of the system need to be 64-bit. Depending on the size of the application and its usage profile, the extra memory can lead to significant speed improvements, while simultaneously reducing the load on the relational database. What are the memory limitations of 64-bit Financial Management. The main benefit of 64-bit Financial Management is the ability to hold substantially more data in memory at one time.
The limit of virtual address space is dictated by Microsoft Windows and is 8 TB 8192 GBcompared to a maximum of 3 GB in 32-bit Windows. Since the physical memory in almost any current computer is far smaller than 8 TB, the implication is that, in practical terms, 64- bit Financial Management is limited by physical memory, rather than virtual memory. In other words, 64-bit Financial Management can take advantage of all available physical memory once the proper memory parameter adjustments are made see below.
Are there any memory settings that need to be tuned for 64-bit Financial Management. Financial Management s default memory settings are appropriate for a small to medium size application in a 32-bit environment. To take advantage of the extra memory in a 64-bit environment, we recommend the following settings for a monthly application. The relevant registry settings are NumDataRecordsinRAM and MaxDataCacheSizeinMB which need to be created or changed in HKEY_LOCAL_MACHINE SOFTWARE Hyperion Solutions Hyperion Financial Management Server on each application server s Windows registry.
The following table contains suggested values for these parameters depending on available memory. If multiple Financial Management applications will be active, then divide the Total physical Memory installed on the server by the number of Financial Management applications to arrive at the Available Physical Memory for each application. This is done with the assumption that Financial Management is the only memory-intensive process running on the machine and running only a single Financial Management application.
Available Physical Memory NumDataRecordsinRAM MaxDataCacheSizeinMB 4 GB 4,000,000 500 8 GB 10,000,000 1500 16 GB 30,000,000 4500 32 GB 60,000,000 9000 For a weekly application, divide the NumDataRecordsinRAM by 4, without changing the value in the last column. Applications with large memory requirements will see the most benefit. What kind of applications will see the most benefit. This includes applications with one or more of the following characteristics.
Small applications, where the total memory footprint of the application, even under load, can fit comfortably in the 32-bit memory space. Large scenarios millions of records per year Dense applications many large subcubes Large memory footprint as a result of many scenarios being accessed concurrently Weekly applications What kind of applications will see the least benefit.
The official Support Site for Canon Products. Welcome to Canon Support. OR Find Your Model Below By Product Type or Series. Cameras EOS Lenses Wireless File Transmitters GPS Receivers Microphones. PowerShot A Series PowerShot D Series PowerShot ELPH Series PowerShot G Series PowerShot N Series PowerShot Pro Series PowerShot S Series PowerShot SD Series PowerShot SX Series Other PowerShot. EOS Film Cameras Compact Film Cameras. Flashes Wireless File Transmitters GPS Receivers Microphones Remote Control Connect Station.
iB Series MB Series. G Series iP Series MG Series MX Series PRO Series MP Series mini Series iX Series TR Series TS Series. iPF Series PRO Series. imageCLASS D Series imageCLASS LBP Series imageCLASS MF Series Other imageCLASS. Black and White imagePRESS Digital Presses Color imagePRESS Digital Presses Océ Black White Digital Presses Océ Color Digital Presses.
CanoScan Series imageFORMULA CR Series Check Scanners imageFORMULA DR Series Office Document Scanners imageFORMULA P Series Personal Document Scanners imageFORMULA ScanFront Series Networked Document Scanners Other Cartridges. EF EF-M EF-S Extender TS-E. Color imageRUNNER ADVANCE Black and White imageRUNNER ADVANCE Color imageRUNNER Black and White imageRUNNER imageCLASS. FAXPHONE LASERCLASS CFX Series. ColorPass Controllers imagePASS Controllers imagePRESS Controllers. Camera Camcorder Printer Network Video Solutions Device Management Document Capture Distribution Information Management Workflow Mobile Solutions Output Management Workflow Solutions.
XU Series BU Series VB Series. Cinema EOS Cameras Cinema EOS Lenses XC Series ME Series VIXIA Series X Series F Series ELURA Series Other Accessories Software Applications. Calculators Binoculars Reference Displays Wireless Presenters. FAQ Knowledge Base Find answers and perform your own troubleshooting. EOS Utility Software Find the EOS Utility Software version compatible with your camera.
Wireless Help Wireless installation instructions for your Canon product. How-To Videos Get to know your product. User Manuals Access Product Manuals and Guides for your Canon product. Troubleshoot and learn to use your product with video tutorials. Service Repair. You can count on Canon s award-winning service and repair department to keep your gear in peak operating condition. Our expert factory-trained technicians provide regular maintenance and repairs.
Canon CarePAK service plans are cost-effective and easy-to-use additional coverage plans. A service plan can provide additional years of service and support from the date you purchased your Canon product. Protect against unforeseen accidentsexcessive downtime, and enjoy peace of mind for years to come knowing your new equipment is covered. Professional Model Firmware Updates Professional Product Warranty Info Product Advisories Mobile Apps.
Repair Resources. Camera Repair Request Form Canon Shipping Solution with The UPS Store Broadcast Lens Repair Request Form Professional Parts Accessories What is Gray Market. Counterfeits Understanding the Problem. Canon Professional Services The Learning Center Recycling Programs Color Calibration Services. About Support. Consumer Support No matter what Canon product you purchase, expect outstanding Service Iqoption paga.
Professional Support Join the growing ranks of pros that rely on Canon Professional Service, Support, and Education Learn More. Services Programs. Business Solutions Delivering the highest levels of customer service and support excellence to our channel partners and end customers Learn More. A COVID-19 Update from the Canon Service Team. We are continuing to thoroughly follow the developments and directives associated with COVID-19 coronavirus.
Learn more about the service measures we have in place. And other updates coming with todays Update 24 for lotro. For the full patchnotes visit the forums by this link. CC 64 bit client and other U24 short guides. This update will come with a downtime. The LOTRO game worlds will be unavailable from 8 00 AM 12 00 PM Eastern -4 GMT on Tuesday, June 4th to release Update 24 Vales of Anduin.
What does 64-bit client do. Simply put, a 64-bit client is more capable than a 32-bit client, because it can handle more data at once. Mostly it can use more memory. They also updated some other code in the client. Of which we don t know what. The game most likely will run smoother at the same or allow higher graphic settings at the same pace. A lot of the crashes in lotro come from the game trying to use more memory then iqoption paga.
It now can if you have it available. What the 64-bit client won t do. It won t make the game look prettier in general. You can increase graphics without the previous risks and costs of crashes. It won t make fix all crashes, stutters and lag. It will only fix a good portion of the reasons it does. Let a pc or laptop previously not able to run the game at all play it now. How do i get or run the 64-bit client. Once you update the client you will already have the client installed.
You just need to enable it. At the place where you enter your username and password. Click the arrow at the top and select options In the general tab, at the bottom, select 64-bit client. Where do i continue the Black book of Mordor. If you have completed Chapter 8. A few quickfire answers to 64 bit client. Log in and play enjoy new frames Find issues and redo steps 1 and 2 and set the client back to 32-bit it s beta.
7 The First Promise, you can pick up Chapter 9 by speaking with Durin on the upper level of Skarháld. How do i get to the Vales of the Anduin. The suggested route is by following the Black book in Skarhald. Or start the questline at the Forest gate in Northern Mirkwood. Forest gate in Northern Mirkwood erys lasgalen North-east path from Misty mountains north of the warg area North-east path from Lothlorien Beorning racial Return home skill. Other ways to get there are.
Virtue quickbits Open the Traits Panel with J to navigate to the redesigned Virtues tab to examine your Virtues, select an earning Virtue, and slot any Virtues you would like active. All deeds now award virtue xp instead of a specific virtue. Select the one you want to focus on and let the spice flow. If you just use 5 virtues like before it will be easier to get them maxed. All others provide a minor bonus passively, but not worth focusing on compared to gear or levels.
Nearly all values have changed so you will want to redo the 5 virtues you have. Where are my screenshots. You might find your screenshots from lotro in a slightly different place. The folder will be the same as before today s update. Windows 10 screenshot place. But they won t be named as the next highest number Screenshotxxxx.
They will be using the screenshot_year_month_day_time_xxx. Known Issues Quest Good to Be Home Some NPCs will initially be phased out despite their quest rings appearing on the radarbut after certain quests are completed you ll be iqoption paga to advance this quest. They will be at the top for most users. Quests Befriending Critters Knowledge of Taming items granted by Radagast during his Befriend Critters quests are missing text telling you not to remove the item from your inventory.
Doing so will cause progress of the Tender of Beasts deed to be reset. Once both Tender of Beasts deeds are completed, the Knowledge of Taming items will be automatically removed from your inventory. Removing the item from your inventory will cancel the quest and block you from progressing further in the region. Quest Dredging Up the Past Sharkey s Orders quest item is currently able to be destroyed, which it should not be.
Please do not destroy the item. It will be removed from your inventory upon quest completion. Quest Rhosgobel Cleaning the Anduin Rhosgobel Cleaning the Tributaries Some of the items needing to be fished for these quests require a higher fishing proficiency, and some can currently only be obtained from other regions.
Very good article, thank you, explains most things that are new changed with U24. You could even post his coordinates, since people often look after him in wrong place even knowing he is on upper level top of Skarhald. I saw many people asking how to use 64bit client, also where is Durin is common question. I don t have the option to check 64-bit client. Help Support LOTRO Players. I for once looked after him inside keep at first.
LOTRO Players News Episode 372 Please Don t Eat the Ancient Evil LOTRO Players on A Burg s Tale Chapter 6 LOTRO Players News Episode 371 A Barrow-Brie Science Experiment LOTRO Players on A Burg s Tale Chapter 5 Skoron on Fushaum Bal A short guide to your quest deed Squirle on Dwellers in Darkness Figure Pack Coming For The Lord of the Rings Journeys in Middle Earth LOTRO Players News Episode 369 Update 26 Quest Pack Review LOTRO Players on A Burg s Tale Chapter Three.
Search LOTRO Players. Follow LOTRO Players. What Is The First Thing You Will Do When Mordor Is Released. Home News Features Screenshots Awards Downloads Forum. burn CDs and DVDs for free. Forum Help FAQ Development Compatible Drives. Download latest version 4. Default installer 32 bit x64 compatible 2000 XP 2003 Server Vista 7 8 10 64 bit Vista 7 8 10 x64 Default installer Without installCore 32 bit x64 compatible 2000 XP 2003 Server Vista 7 8 10 64 bit Vista 7 8 10 x64 Portable version 32 bit x64 compatible XP 2003 Server Vista 7 8 10 64 bit Vista 7 8 10 x64 MSI 32 bit 2000 XP 2003 Server Vista 7 8 10 64 bit 2003 Server Vista 7 8 10 Picasa integration CDBurnerXP button Google Picasa Old versions 32 bit 98 2000 Iqoption paga.
Language last change Arabic ar-JO 2010-02-22 Participate in translation Catalan ca 2017-10-26 Chinese zh-CHS 2017-12-07 Chinese zh-CHT 2017-10-23 Croatian hr-HR 2013-07-10 Czech cs-CZ 2015-06-06 Danish da-DK 2012-05-03 Estonian et-EE 2017-10-20 Finnish fi-FI 2014-05-04 French_fr-FR 2016-11-01 Galician gl 2012-01-27 Georgian ka-GE 2011-07-10 German_de-DE 2017-11-01 Greek el-GR 2017-10-16 Hebrew he-IL 2017-10-24 Hungarian hu-HU 2017-10-27 Indonesian id-ID 2017-02-15 Japanese ja-JP 2010-10-08 Kazakh kk-KZ 2014-11-12 Korean ko-KR 2010-05-05 Latvian lv-LV 2011-08-30 Norwegian nb-NO 2016-04-18 Polish pl-PL 2017-12-02 Portuguese pt-PT 2018-10-10 Portuguese pt-BR 2017-11-01 Romanian ro-RO 2014-10-26 Russian ru-RU 2017-10-23 Serbian sr-Cyrl-CS 2017-10-22 Serbian sr-Latn-CS 2017-10-22 Slovenian sl-SI 2015-02-11 Spanish es-AR 2015-04-14 Spanish es-ES 2016-10-01 Spanish es-MX 2017-10-24 Swedish sv-SE 2012-11-17 Turkish tr-TR 2018-05-09 Ukrainian uk-UA 2016-11-21.
2004 - 2020 Impressum Privacy Design by styleshout RSS feed. Checking 32 or 64-bit Kernel Boot Mode in Snow Leopard. B y default, even on fully 64-bit Macs, Snow Leopard boots into a 32-bit kernel. This is because not all kernel extensions are 64-bit ready. This short HOW-TO explains how to tell which mode you ve booted into. We ll be sorting all that out in the coming weeks, piece by piece, to make it understandable.
With the introduction of Snow Leopard, there is a some confusion about 32 64-bit apps and 32 64-bit Extensible Firmware Interface EFI and 32 64-bit kernel extensions. Apple knows best on this. By default, your Snow Leopard system except for Xserves boots into a 32-bit kernel, even on the latest Macs. That doesn t keep you from running 64-bit applications and addressing more than 2 GB of RAM.
The problem is that you may have some kernel extensions that are not 64-bit capable. You can try booting into the 64-bit kernel by holding down the 6 and 4 keys together at boot, but not everything may work correctly. To get a feel for some extensions that would be a problem, take a look at About This Mac - More Info - Software - Extensions. On my system, several are still flagged as 32-bit only. System profiler shows whether kernel extensions are 64-bit. For now, you may be wondering how to tell if your system was booted into 32 or 64-bit kernel mode.
Just take the same route above, but stop at Software, and look for the 64-bit Kernel and Extensions flag, circled in red below. It s just one more step in the roadmap to a full 64-bit Mac. System profiler shows mode booted into. There s really no stigma attached to running in the 32-bit kernel mode, and, in time, all our kernel extensions will be 64-bit. Detecting 32 64 bit systems.
I can t really find a clear solution in google how would one go about detecting if the system is 32 or 64 bit. There are UNIX, WIN32 etc. flags, but nothing really for the architecture. Thanks a lot, Dominik _______________________________________________ Powered by www. Re Detecting 32 64 bit systems. OK, got it experimentally.
Opposed to the explanations there, which I saw, but took as not what I need, on my systems it amounts to i686 and x86_64, exactly what I need. On Sat, Feb 12, 2011 at 6 19 PM, Dominik Szczerba wrote Hi, I can t really find a clear solution in google how would one go about detecting if the system is 32 or 64 bit. But wait, is the description below correct.
-- Ryan Pavlik HCI Graduate Student Virtual Reality Applications Center Iowa State University. _______________________________________________ Powered by www. So you claim that on Windows CMAKE_SIZEOF_VOID will tell me the target build system, not the physical one, while it will mach CMAKE_SYSTEM_PROCESSOR if the both are the same. Many thanks for the clarification. On Sat, Feb 12, 2011 at 6 34 PM, Ryan Pavlik wrote. I have done the same thing myself, using size of INT instead of P which is of course following the exact same logic.
After attempting several strategies I found this one to be the safest way to detect 32 64bit systems, so I recommend using SIZEOF as well. On Sunday 13 February 2011 08 00 41 PM Ryan Pavlik wrote. But there s one important pitfall fat binaries. on Mac OS X if CMAKE_OSX_ARCHITECTURES is set to multiple architectures especially, if they re mixed 32 64 bit you can t rely on the value of CMAKE_SIZEOF_VOID_P.
In order to solve this problem, you ll want to look at the documentation of the CheckTypeSize module. I usually do something like this. include CheckTypeSize check_type_size void SIZEOF_VOID_P BUILTIN_TYPES_ONLY configure_file config. Where config. in contains at least. Set to sizeof void SIZEOF_VOID_P_CODE. You can t do anything about this stuff in your CMake code, because you are compiling both for 32 _AND_ 64 bit at the same time.
The variable SIZEOF_VOID_P_CODE defined by the check_type_size macro contains preprocessor code defining the symbol SIZEOF_VOID_P to the appropriate number depending on the current architecture. On 02 14 2011 09 57 AM, Yngve Inntjore Levinsen wrote. sizeof int is 4 on basically all systems I have ever seen ignoring those 16bit machines of 286 areas or things like that so this test is basically useless.
Also testing for sizeof long will get you into trouble as this 8 for Un x64 but 4 for Win64. The best way is usually sizeof void even if there are programming model where you would get a 32 bit pointer even in a 64 bit executable but those have to be explicitely enabled and are barely ever used from my experience. Eike _______________________________________________ Powered by www. Perhaps I should change to VOID instead, thanks for the tip. This was my previous code INCLUDE CheckTypeSize CHECK_TYPE_SIZE long LONG_SIZE 4 if 32bit, 8 if 64bit.
I don t actually build for Windows yet, so I suppose that is why I didn t notice the potential problem. On Monday 14 February 2011 10 35 26 AM Rolf Eike Beer wrote. This will FAIL on windows. MSVC defines long as 32 bits on BOTH 32 and 64 bit compiles. Sorry, I meant LONG actually, I was a bit tired when I wrote the mail. Stick with the already defined CMAKE_SIZE_OF_VOID_P instead. As mentioned earlier, when building for OS X and universal binaries there are some special considerations to examine.
It is known to work correctly on all the systems that CMake defines. ___________________________________________________________ Mike Jackson www. net Principal Software Engineer hidden email BlueQuartz Software Dayton, Ohio. On Feb 14, 2011, at 1 39 PM, Yngve Inntjore Levinsen wrote. After switching to 64 bit build option in code editor I get the error message Invalid solution configurationwhich is fine but when I try and switch back to 32 bit the message remains and I can no longer build.
The only way to fix the problem is to delete the _C Build folder. However to do this you must restart because the build_log. txt states it is still being used by Visual Studio, even though no visual studio instance is running. 05-08-2011 02 48 AM Esenthel Administrator. I ve just tested this but don t have this problem. Can you make sure you have latest engine. pak in your SDK Data, and you re running editor from SDK Tools.
What other config do you use. dx9 dx10, debug release, vs2008 2010. 05-08-2011 11 32 AM Esenthel Administrator. Oh, maybe you re using VS Express. It doesn t support 64-bit builds. Edit I ll prevent launching VS Express from trying to compile 64-bits. 05-08-2011 11 32 AM Brad_Mclain Member. Updated SDK pak, Game Path pak, both visual studio 2008 and 2010 headers with auto update tool. Did a bit more testing can confirm that the error only occurs in visual studio 2008, 2010 appears to work fine.
05-08-2011 01 51 PM Spikelife Member. I ran the Autoupdate. I use Visual Studio 2010 this happens to be the compile for MMO. I am running 2008 professional so don t think express is the problem. But they all do the same thing except I didn t test RPG 2. Where all previous builds succeeded, now any build for x64 fails on both release and debug for Dx10 and x64 regular.
Win32 succeeds in all modes. All the x64 type builds for all modes fail with the following. Quote 1 ------ Rebuild All started Project server, Configuration Debug DX10 x64 ------ 1 stdafx. cpp 1 Net Item. cpp 2 fatal error C1083 Cannot open include file stdafx. h No such file or directory 1 Net Inventory. Shared Net Inventory. Shared Net Item. h No such file or directory 1 Net Chr. Shared Net Chr.
h No such file or directory 1 Client Server. Shared Client Server. h No such file or directory 1 Chr Create Request. h No such file or directory 1 Server. Shared Chr Create Request. h No such file or directory 1 Main. h No such file or directory 1 Client. h No such file or directory 1 Generating Code. Rebuild All 0 succeeded, 1 failed, 0 skipped. 05-08-2011 09 35 PM Dandruff Member. 05-08-2011 10 51 PM Spikelife Member. 05-08-2011 10 57 PM Spikelife Member.
05-09-2011 09 23 PM Esenthel Administrator. 05-09-2011 09 30 PM Spikelife Member. 05-09-2011 10 37 PM Esenthel Administrator. 05-09-2011 10 51 PM Spikelife Member. 05-10-2011 12 00 AM Driklyn Member. 05-10-2011 12 00 AM Spikelife Wrote I haven t even tried to use your code editor yet. 05-10-2011 08 25 AM Esenthel Administrator.
05-10-2011 01 09 PM Spikelife Member. Quote I use Visual Studio 2010. but I guess that wasn t specific enough. Clearly that was a stupid assumption. So sorry -- The reason I posted here is because it sounded like the Autoupdate affected the code editor and the compiles without any user intervention; and I thought that is what caused my problem. Next time I ll make a new thread for everything.
h No such file or directory 1 Account. So sorry for misinterpreting and posting a problem in the wrong place. Not sure if this is the right place to put this question, but here goes. All the researchers in the department have SAS installed on our PCs. Setting the scene SAS datasets sit on a server and some datasets have permanent formats associated with them written with a 32 bit machine. Until a few days ago, I also had a 32 bit machine but have now swapped to a new 64 bit machine.
SAS 64-bit v 9. 3 has been installed on my computer. However, if I re-do the formats using 64-bit SAS, will this then make the datasets incompatible for other users that still have the 32-bit SAS on their machines. pdf for some hints to make the datasets useable for me, but I don t want to stuff them up for other users.
You need to have different versions 32-64-bit of catalogs with same logic as long as you are using the data on different machines. Would advise to place them on a separate location. Not mixed with the datasets. Question I know that catalogs for formats are not compatible between the 32-bit and 64-bit versions of SAS. In that way data shoul be accessible from both type of installations 32-64 bit.
A good starting point for migration is the SAS support migration notes. Looking closer ther are two approaches used with proc migrate. b connect share With this you can have 1 version up down difference while migrating. Needing to have it supported by It-staff. a cport cimport This permanent conversion just upgrading the data. Expecting the interface to MS-Office. Now running 64-bit SAS you will probably get more 32-64 bit issues. Yep, will keep different catalogs for the different formats.
Thank you for your suggestion. You might find the FMTSEARCH option useful to have users point to different libraries containing the 32 or 64 bit versions of your custom formats. Am currently investigating this option. Maintain separate libraries or at least catalogs and use the automatic macro variables like SYSVER, SYSSCP and SYSMAXLONG to determine which one to include in your FMTSEARCH setting.
Our stats group now discussing best way to proceed until all are using 64 bit machines will happen within the next 6-12 months. SAS tips in your inbox. Subscribe to the SAS Tech Report for timely SAS tips and news delivered each month. Learn about the latest articles, videos, and code samples to keep your SAS skills fresh. Compiler Settings for Embarcadero C Builder XE3 - XE5 64-bit. This topic explains how to prepare 64-bit applications created with Embarcadero C Builder XE3 - XE5 for AQTime.
To learn how to prepare 32-bit applications created with C Builder, see Compiler Settings for Embarcadero C Builder XE3 - XE5 32-bit. Note 64-bit applications created with Embarcadero RAD Studio XE3 - XE5 are not currently supported by the Allocation profiler. To learn how to prepare applications created with other C Builder versions, see Compiler Settings for Native Applications.
To prepare a 64-bit Embarcadero C Builder application for AQTime, first of all, you need to make sure that it includes debug information. Open your project in C Builder XE3, XE4 or XE5. In the tree on the left of the dialog, select the C Compiler Debugging category. To include symbolic debug information, set the Debug information option to True. Click the image to enlarge it. To set the Delphi compiler options, select the Delphi Compiler Compiling category from the tree view on the left of the dialog.
Choose Project Options from the main menu to open the Project Options dialog. In addition, to refer this information to source line numbers, set the Local symbols option to True. Optional To generate stack frames when using the Delphi compiler, set the Stack frames option to True. Switch to the C Linker category and set the Full debug information option to True. To generate a map file that contains information on the application s global symbols, source files and source line numbers, switch to the C Linker Output category and set the Map file type option to Map file with segmentsMap file with publics or Detailed segment map.
Switch to the C Shared Options category and check the Library path option. Make sure that the path contains the BDS lib PLATFORM debug folder. Once you have set the compiler and linker options correctly, rebuild your application and it will be ready for profiling. If you are profiling an ActiveX control or a COM server, you need to register its debug version in the system See Profiling COM Applications.
When your application is ready for release, remember to recompile it without debug information to reduce the application size. If you do not use the P64 directive when you compile your program, the program can only be run on a 32-bit development system, or on COBOL Server in 32-bit mode. The Compiler directive P64 enables you to create a program that can be run on a 64-bit development system or on COBOL Server in 64-bit mode. Therefore, if you have developed an application on a 32-bit development system, you must recompile it with the P64 directive set, if you want to migrate it using COBOL Server in 64-bit mode.
The P64 directive is set by default if you compile using the cob64 command, or using the cob command with the 64-bit working mode. The P64 directive is set by default if you choose 64 bit in Platform Target on the COBOL page of your build configuration options. Compiling Programs for 64-Bit. Compteur 32 bits - 64 bits de Youtube. Je suis un peu en retard sur la nouvelle mais je viens juste de lire cet article sur la vidйo de Gagnam Style qui a fait exploser le compteur de Youtube.
Bon, j ai rigolй un peu en lisant le 9,2 milliards mais ma question est plus technique. Si on m avait demandй mon avis j aurais plutфt doublй ces valeurs. Youtube indique qu un compteur 32 bits est limitй а 2 147 483 647 2 31 et qu un compteur 64 bits est limitй а 9 223 372 036 854 775 808 2 63. Manifestement il y a quelque chose que j ignore ou que je comprends mal. On dirait qu il y a un bit qui n est pas utilisй. Quelqu un pourrait m йclairer. c est la solution de simplicitй d utiliser des nombres signйs donc la moitiй pour les nйgatifs et l autre pour le reste les positifs non nuls et 0.
зa permet aussi de rendre une valeur nйgative en cas d erreur et positive en fonctionnement normal. Re Compteur 32 bits - 64 bits de Youtube. La rйponse ci-dessus est juste mais on peut la dйvelopper un peu Le problиme vient effectivement de l utilisation des nombres signйs. En binaire, pour coder un entier tu as deux solutions les nombres signйs et non signйs. Signй veut dire qu on peut stocker des valeurs positives comme des nйgatives.
En arithmйtique signйe tu as le premier bit qui sert а dйfinir si ta valeur est positive 0 ou nйgative 1. Les nombres positifs s йcrivent trиs facilement, les nйgatifs sont un peu plus subtils notion de complйment а 1, 2, etc. Un entier signй ira de -2147483648 а 2147483647, alors qu en non signй la plage sera de 0 а 4294967295, d oщ la presque division par 2 en apparence de la borne supйrieure en signй. Quant au fait d avoir utilisй pour youtube un nombre signй pour un compteur c est une йtourderie ou une limitation du systиme de typage utilisй par leurs outils.
Derniиre modification par TotalRecall ; 05 01 2015 а 16h47. Merci de vos rйponses. Juste pour le plaisir de vйrifier ma comprйhension Le compteur йtait trop limitй, il fallait obligatoirement l augmenter. Зa, je le comprends. Youtube a choisi de passer а 64 bits, ce qui est une solution diablement efficace et йvite que le problиme ne rйapparaisse. Et quand on compare l espace requis pour une vidйo а l espace requis pour le compteur, c est certainement la meilleure solution.
Mais si je comprends bien Youtube aurait pu considйrer toutes les valeurs de son compteur 32 bits comme nйgatives par dйfaut et ajouter 2147483648 а la valeur, puis changer le signe lorsque le nombre de vues atteint cette valeur. Youtube aurait donc thйoriquement pu doubler son compteur sans augmenter le nombre de bits. Y a-t-il un problиme thйorique а cette idйe.
Bien sыr, il n y a pas de problиme thйorique il y en a des pratiques au niveau de la gestion des exceptions, etc. mais c est possibleseulement quand la limite finale aurait йtй atteinte et elle l а йtй si tu dit qu il y a 9e9 vuesils auraient fait quoi. J ai bien ri en voyant le 9,2 milliards йcrit par l auteur car la valeur а laquelle il faisait rйfйrence йtait plutфt 9 223 372 036 854 775 808.
J ai ri de l erreur, sans plus. Le 9,2 milliards n a jamais йtй atteint, loin de lа. L intйrкt serait alors purement marketing annoncer une fois de plus que le compteur a atteint son maximum, donc faire parler de soi. Le plus drфle est que ca reste plausible comme valeur. I needed to configure the three DHCP Servers. One of them was located on 64Bit Windows 2008R2 and two of them were located on 32Bit Windows 2003R2.
Configuring DHCP Servers Manually on 32Bit and or 64Bit Windows Server Option 120 and Option 43. First of all, I had to copy DHCPUtil. exe and DHCPConfigSctip. The files were copied from Lync server. You can find them in C Program Files Common Files Microsoft Lync Server 2010 folder. bat files from Lync server to my DHCP server.
After that, I run DHCPUtil. com on the Lync server, and received the following output. Regular IT Guy. Output of the command gives me two options. exe -SipServer lyncsrv. Run DHCPUtil on the DHCP Server use -RunConfigScript switch Run the following command on the DHCP Server modify the path of DHCPConfigScript. bat appropriately C Program Files Common Files Microsoft Lync Server 2010 DHCPConfigScript. bat Configure MS-UC-Client 00076C796E6373727606646F6D61696E03636F6D00 4D532D55432D436C69656E74 6874747073 6C796E637372762E646F6D61696E2E636F6D 343433 2F4365727450726F762F4365727450726F766973696F6E696E67536572766963652E737663.
Option 1 is for 64Bit machined and option 2 is for 32Bit machines. On my 64Bit Windows Server 2008R2 DHCP Server, all I had to do is to run DHCPUtil. com -RunConfigScript command. And that was it, it was very simple and easy. DHCP Server is configured and ready to use. I also had Windows 2003R2 32Bit servers. This meant that I had to run the following command on my DHCP server DHCPConfigScript. I run above command on one of the servers and everything worked great. It created all DHCP options that are needed and everything looked good.
I had problem on my second server. Obviously, this is not what I needed. The script told me that command was run successfully, but it added only one option called Unknown. Yeah, I know, usually it does not help, but I wanted to try it. Well, it did not work. I deleted the Unknown option one more time, and decided manually to create necessary options. These are the steps that I had to do. Open DHCP Server Console and right click on the server name. Click on Set Predefined Options.
Click on Add button and create a new Option Type as it is shown on the picture. I deleted the Unknown option, and tried to run the same command a few more times. Now I had to check the same output that I saw before. This shows the input for different options that have to setup manually. It shows me what I need to enter for Option 120, and sub-options 1, 2, 3, 4, and 5.
Right click on the Server Options and click on Configure Options. Clicked OK twice and clicked on the Server Options of the DHCP Server Console. Select 120 SIP Server and enter the first set of number that you see next to the Option 120. The number should be entered in the Binary Section of the Option 120. In this case it is 00076C796E6373727606646F6D61696E03636F6D00. The next step is to define new Vendor Class.
Right click on server name in the DHCP console and select Define Vendor Classes. Enter the following Display name is MSUCClient, Description is UC Vendor Class ID. Enter MS-UC-Client in the ASCII Section. Note It did not work for me when I tried it the first time. The error told me that the MSUCClient class was, but I could not see it or use it. I had to open Command Prompt and use the following command. netsh dhcp server delete class MSUCClient. It worked after that. Next step is to create sub-options 1 through 5.
Right click on the server name in DHCP Console and select Set Predefined Options. In the Option Class select MSUCClient. Create the following five options. Click on Advanced tab and select MSUCClient in the Vendor class box. Add options 001 through 005 exactly as we added Option 120, using the correct values that we received when we iqoption paga DHCPUtil.
In my case, the values are. sub-option 1 UC Identifier 4D532D55432D436C69656E74. sub-option 2 URL Scheme 6874747073. sub-option 3 Web Server FQDN 6C796E637372762E646F6D61696E2E636F6D. sub-option 4 Web Server Port 343433. sub-option 5 Relative Path for Cert Prov 2F4365727450726F762F43657274.
Coments:29.02.2020 : 04:51 Galmaran:
Iqoption paga 45no-wrap msgid Launching the Telnet interface - wxWindows interface msgstr type Iqoption paga of. xml 48no-wrap msgid The default port is 4212.
26.02.2020 : 07:02 Tojashicage:
Neto disse que iqoption paga desesperado e fez um apelo para encontrar seu iqoption paga.